Danfoss Coils
Danfoss Solenoid valves and coils are usually ordered separately -
this allows maximum flexibility and enables the users of these
products to select a valve and coil which best suit their needs.
If you do not see any coils that meet your requirements, the
please do not hesitate to give us a call or email. Email Freddy or call Freddy - Peace Refrigeration's Danfoss Consultant on 03-8961 9008. Download the Danfoss Coils Technical brochure on PDF.
BA Coil
9 W a.c. / 15 W d.c. IP00 |
BB Coil
10 W a.c. / 18 W d.c. IP00 |
BE Coil
10 W a.c. / 18 W d.c. IP67 |
BG Coil
12 W a.c. / 20 W d.c. IP67 |
Power Consumption |
Cut in: |
a.c. : 39 VA |
a.c.: 44 VA |
a.c.: 44 VA |
a.c.: 55 VA |
Holding: |
a.c.:19VA (9W), d.c.:15W |
a.c.:21VA (10W), d.c.:18W |
a.c.:21VA (10W), d.c.:18W |
a.c.26 VA(12 W), d.c.:20W |
Voltage tolerance: |
220 / 380 V a.c. coils: 10%, -15%.
230/400 V a.c. coils: +6%, -10%. Other a.c. oils with NC valve
+10%, -15%. Other a.c. coils with NO valves and all d.c. coils
± 10% |
Connection: |
Spade terminals |
Spade terminals |
Terminal box |
Terminal box |
|
to DIN 43650 form A |
to DIN 43650 form A |
Pg 13.5 |
Pg 13.5 |
Enclosure: |
IP00 |
IP00 |
IP67 |
IP67 |
With cable plug: |
IP65 |
IP65 |
N/a |
N/a |
Ambient temp. |
AC: |
40oC |
80oC |
80oC (50oC
for 50/60Hz coils) |
80oC |
DC: |
40oC |
50oC |
50oC |
50oC |
Duty rating: |
continuous |
continuous |
continuous |
continuous |
|
|
|
|
|
Suitability with valve type: |
a.c. |
d.c. |
|
|
|
EV210B |
yes |
yes |
yes |
yes |
yes |
EV220B |
yes |
yes |
yes |
yes |
yes |
EV250B |
|
|
yes |
yes |
yes |
EV310B |
yes |
yes |
|
|
|
EV212B |
yes |
|
yes |
yes |
yes |
EV222B |
|
|
yes |
yes |
yes |
Coil type |
BA |
BB |
BE |
BG |
L without cable plug |
54mm |
62mm |
- |
- |
L with cable plug |
79mm |
85mm |
94mm |
112mm |
L1 |
19mm |
22mm |
22mm |
30mm |
W |
32mm |
46mm |
46mm |
68mm |
Type B Coils d.c. voltage
|
Type BA (15 W IP00) |
Type BB (18 W IP00) |
Type BE (18 W IP 67) |
Type BG (20W IP67) |
Supply voltage |
Designation |
Code
No. |
Designation |
Code
No. |
Designation |
Code
No. |
Designation |
Code
No. |
12 V |
BA012D |
042N7550 |
BB012DS |
018F7396 |
BE012DS |
018F6756 |
BG012DS |
018F6856 |
24 V |
BA024D |
042N7551 |
BB024DS |
018F7397 |
BE024DS |
018F6757 |
BG024DS |
018F6857 |
Cable plug to IP65 Enclosure |
|
042N0156 |
|
042N0156 |
IP67 cable plug fitted as
standard |
IP67 cable plug fitted as
standard |
Spare Parts - Permanent Magnet
With this device, it is possible to operate solenoid valves during
installation without actually wiring the coil.
Code no. 018F0091
For other spare parts please contact us.
Other Danfoss Coils
Hum Free Coil 20W a.c.
Hum-free coil for valve range B, with extra low noise level , 20W ac,
IP67
- Clip-on system for fast, easy fitting and removal
- Hum-free for installations sensitive to noise, such as heating
systems
- Built-in rectifier
- Encapsulated coils with long operation life
- Ambient temperature: Up to +50°C
- IP 67 for moist environments with flying lead
Type BO, EEx m II T4 coils, 10 W a.c. / 10 W d.c.
- For explosion risk environments
- For EV210B, EV220B and EV250B valves
- Approved for application in zone 1 areas in accordance with the
standards EN 50014 including AMD 1-5 and EN 50028
- Ambient temperature: up to +40oC
- IP67 with 5 m 3-core flying lead
- Seal kit as accessory for extremely wet and aggressive
environments
Coils with flying lead
- IP67 coils complete with 1 m 3 core cable
- Saves time on installation
- Continuously rated
- 80oC amb. temperature
- Available as standard in all common voltages